Part numbers: Omega GF 620 spare parts catalogue. Numbers stamped on the parts are teaching labels; real 565 parts are not marked with them. Parts are drawn for teaching from the 565 film drawings, not to scale. Screws and the automatic block: Omega Technical Guide No. 13 (551) and TG-19-C-097 (565). Omega prints no order for the dial and movement sides; they follow normal bench order, as in the 565 film. Hands and dial come off before the bench starts; they vary by model. Right-drag or two fingers to look around. T shows the tray. F is full screen. Oiling of the automatic device: Omega Technical Guide No. 13 (1959), Synta-Visco-Lube; Omega gives no oiling chart for the train or the calendar of this family, so none is shown. When each drop goes on is normal bench practice. Spotted a wrong number or a control that fights you? Send feedback. Want it on paper? Get the 565 Bench Map first.

THE BENCH PUBLIC BETA

Virtual watchmaking · no sign-up · play on your phone or computer

A full service on a vintage Omega calibre 565, from dial off: dial side, automatic device and movement side come apart into three trays, then it all goes back, last out first in. Every part with its number, and the automatic device oiled the way Omega’s 1959 guide gives it. A virtual service before you open your own.

Practise here first. Opening a real watch without the right tools and skill can damage it, and the repair bill is yours. Part numbers are copied by hand from Omega’s printed books and may contain errors: check against your part before buying. Terms

Learn shows every part, tool and number. Practise asks you to name the next part before it moves, and so does every round after your first: tap Quiz at the top to switch that off. Each step is read aloud; tap Voice to switch it off. Numbers stamped on the parts are teaching labels, not factory marks.