Omega calibre 684
24-jewel Omega calibre in Omega's 1971 parts catalogue. Used in De Ville, Genève and Seamaster references.
eBay links are affiliate links: Watch Breaker may earn a small commission.
- 684.1031Upper bridge for automatic deviceeBay
- 684.1033Lower bridge for automatic deviceeBay
- 683.1000PlateeBay
- 683.1001Barrel bridgeeBay
- 683.1003Wheel train bridgeeBay
- 683.1208MainspringeBay
- 620.1321Balance staff, pivotedeBay
- 683.1327Balance, completeeBay
- 620.1316Jewelled pallet fork and staffeBay
- 683.1305Escape wheeleBay
- 670.1101Crown wheeleBay
- 683.1100Ratchet wheeleBay
- 620.1106Winding stemeBay
- 683.1109Setting levereBay
- 683.1224Center wheel with cannon pinion H0eBay
- 670.1240Third wheeleBay
- 683.1243Fourth wheeleBay
- 683.1026RotoreBay
printed on Omega's 684 sheet; the rest carry over from base calibre 683.
Calibres built on the same base, 683:
| Calibre | Jewels |
|---|---|
| 683 | 17 |
| 685 | 24 |
Look up any of them in the parts finder to compare part numbers.
- ST 155.0005 De Ville 1973 - 1975
- MD 766.0812 Genève 1974
- PA 566.0039 Seamaster 1971
- ST 155.0006 De Ville 1973 - 1975
- ST 566.0036 Genève 1970
- ST 366.0844 Seamaster 1976
- ST 355.0803 De Ville 1973
- ST 566.0045 Genève 1972
- ST 566.0018 Seamaster 1970
- ST 566.0073 Genève 1974
- ST 566.0032 Seamaster 1970
- ST 566.0074 Genève 1974
- ST 566.0089 Seamaster 1976
- ST 766.0805 Genève 1973 - 1977
- ST 766.0818 Seamaster 1976
- ST 766.0919 Seamaster 1976 - 1982
16 references list the 684 in the Omega Vintage Database. Search them all.
Omega prints it as 17.50 RA T1 SC PC CAL 24 pierres: sweep second (SC), shock protected (PC).
Omega's sheet says the calibre number is marked on the bridge.
21,600 beats an hour; lift angle 48°.
Sources: Omega GF 620-5, Omega regulating specifications, Omega Vintage Database. Part numbers are copied by hand: check every number against your part before you buy. Watch Breaker is independent and not affiliated with Omega SA. Omega is a trademark of Omega SA.