Parts list · Chronostop
Omega 865 parts list: the Chronostop parts people hunt, and what else fits
The calibre 865 is the hand-wound, single-pusher chronograph in the Chronostop, from about 1966 to 1970. Omega's GF 620-4 catalogue lists 96 part numbers for it. Here are the ones people hunt, with the Speedmaster calibres that share each one. Most of the 865 is Speedmaster: 70 of its parts are shared with the 860 family, so a broken 860 or 861 is a parts source for it, and the other way round.
Find 865 parts on eBay
Whole movements and donors first. The parts people hunt have their own searches below.
Jump to the partsAffiliate links: Watch Breaker may earn a small commission. Opens in a new tab.
What else fits
Every part the 865 shares with the Speedmaster family is listed for the 860, so an 860 is the most complete donor; the 861 shares 63 and the decorated 863 shares 45. The catalogue's 865 section is dated 1967, two years before the 860's own section, and it already uses 860 part numbers. For the same interchange seen from the Speedmaster side, see the 861 parts list.
Looking for one part across every calibre? Search it in the parts finder.
The parts people hunt
Nineteen of the 865's 96 parts: the ones that wear, break or go missing, and the ones that sell. Each has a live eBay search, and Every fit opens that part in the parts finder with every calibre it fits.
| Part no. | Part | Also listed for | Find it |
|---|---|---|---|
| 860.1208 | Mainspring | 860, 861, 863 | eBay Every fit |
| 860.1200 | Barrel with arbor | 860 | eBay Every fit |
| 865.1106 | Winding stem | 865 only | eBay Every fit |
| 860.1109 | Setting lever | 860, 861, 863 | eBay Every fit |
| 320.1111 | Yoke | 860, 861, 863 | eBay Every fit |
| 860.1218 | Cannon pinion, H0 | 860 | eBay Every fit |
| 860.1305 | Escape wheel, pivoted | 860, 861, 863 | eBay Every fit |
| 860.1316 | Jewelled pallet fork and staff | 860, 861, 863 | eBay Every fit |
| 860.1321 | Balance staff, pivoted | 860, 861, 863 | eBay Every fit |
| 860.1327 | Balance with hairspring, regulated | 860, 861, 863 | eBay Every fit |
| 860.1030 | Balance cock | 860, 861 | eBay Every fit |
| 860.1347 | Incabloc, upper | 860, 861, 863 | eBay Every fit |
| 860.1712 | Coupling wheel | 860, 861, 863 | eBay Every fit |
| 865.1720 | Operating lever, mounted | 865 only | eBay Every fit |
| 865.1728 | Hammer, mounted | 865 only | eBay Every fit |
| 865.1734 | Hammer spring | 865 only | eBay Every fit |
| 865.1705 | Chronograph runner, mounted | 865 only | eBay Every fit |
| 860.1911 | Casing clamp | 865 only | eBay Every fit |
| 2236 | Screw for dial | 865 only | eBay Every fit |
The other 77 parts, from screws and jewels to springs and bridges, are in the parts finder. Type a part number, or the calibre and the part name. Search the 865's parts
Source: the 865 section of Omega's GF 620-4 spare-parts catalogue (1967, folios 1 to 5), as transcribed into the Watch Breaker parts database. "Also listed for" means the same part number is printed for that calibre in the Speedmaster family (860, 861 and 863), in Omega's catalogues or technical guides. The parts finder shows every calibre a part fits. A part number's prefix shows the calibre it was first made for, not every calibre it fits. If you find a mistake, email id@watchbreaker.com and I'll check it against the page.
Not sure it's an 865?
With the caseback off, look for the calibre number on the balance cock; the 865 is not marked on the plate. One pusher on the case, hand-wound, 27 mm: that is the Chronostop layout. Two pushers means a Speedmaster family movement such as the 860 or 861. The calibre lookup has the specifications, and the Genève guide lists the Chronostop references (145.0009 and 145.0010 for the 865).
Six photographs and the weight, and I put it in writing: calibre confirmed against its factory sheet, case checked against Omega's own case data, serial dated, dial judged, three honest values. Within a day. US$75, and nothing to pay until I confirm the photos can answer it.
Questions people ask
Are Omega 861 and 865 parts interchangeable?
Many are. Of the 96 part numbers Omega lists for the 865, 63 are also listed for the Speedmaster's 861, including the balance, escapement, shock protection, keyless works and most of the chronograph coupling. The plate, bridges, winding stem, fourth wheel and the single-pusher works are the 865's own.
What is the Omega calibre 865?
The hand-wound, single-pusher chronograph movement in the Omega Chronostop, from about 1966 to 1970. It measures 27 mm across and 5.70 mm high, beats at 21,600 an hour, and is marked on the balance cock rather than the plate.
Which parts are unique to the Omega 865?
23 of its 96 part numbers are listed for the 865 alone: the plate and bridges, crown wheel and core, winding stem, fourth wheel, chronograph runner, the single-pusher operating lever, hammer, hammer spring, hammer bolt and bolt spring, the pallet and roller jewels, the casing clamp and a few screws and jewels.
Where can I buy Omega 865 parts?
Swatch Group stopped supplying spare parts to independent wholesalers at the end of 2015, so 865 parts come from used stock and donor movements. The parts people hunt are listed on this page with live eBay searches, and the parts finder shows which calibres share any part.
Watch Breaker is an independent identification specialist and parts dealer and is not affiliated with, endorsed by or connected to Omega SA or the Swatch Group. Omega is a trademark of Omega SA. Part numbers are Omega's, transcribed from printed catalogues; no catalogue pages are reproduced. Terms.