Omega calibre 861
The hand-wound chronograph Omega fitted to the Speedmaster from 1968 until the 1990s: a 27 mm movement with a 30-minute and a 12-hour recorder, cam-switched rather than column-wheel, and the direct ancestor of the 1861.
eBay links are affiliate links: Watch Breaker may earn a small commission.
- 861.1000PlateeBay
- 861.1002Barrel and train wheel bridge, 3/4 plateeBay
- 861.1200Barrel with arbor, driving pinion and friction springeBay
- 861.1204Barrel arboreBay
- 861.1216Centre wheeleBay
- 861.1218Cannon pinioneBay
- 861.1224Centre wheel with cannon pinioneBay
- 861.1231Hour wheeleBay
- 861.1243Fourth wheeleBay
- 861.1705Chronograph runner, mountedeBay
- 861.1708Minute-recording runner, mountedeBay
- 861.1750Hour recorder stop levereBay
- 861.1759Stem-bolt for hammereBay
- 861.1774Hour recorder yoke, mountedeBay
- 861.1775Hour recorder bridgeeBay
- 861.1776Supporting bridge for dialeBay
- 861.1778Clutch uncoupling eccentriceBay
- 861.1779Switch, mountedeBay
- 861.1784Operating lever for hour hammereBay
- 861.1791Driving pinion, mounted (hour recorder)eBay
- 861.1793Spring for hour recorder stop levereBay
- 861.1794Hour hammer springeBay
- 861.1844Upper cam for hammereBay
- 861.8026Tapped foot for operating lever yokeeBay
- 861.8027Tapped foot for operating lever, switch, hour hammer springeBay
- 861.8028Tapped foot for lower and upper cameBay
- 861.8338Tapped foot for lockeBay
- 861.8339Tapped foot for hour recorder yokeeBay
The 861's own part numbers. Omega's service guide also lists yellow and pink plate variants (the J and R suffixes) and case-dependent pusher stems. Look any number up in the 861 parts list.
The 861 family in our records — the same movement through two numbering changes:
| Calibre | Diameter | Height | Jewels | Beats/hour | Reserve | Source |
|---|---|---|---|---|---|---|
| 861 | 27.00 | 6.87 | 18 | 21,600 | 50 h (1970) · 45 h (modern) | Omega technical guide |
| 863 | 27.00 | 6.87 | 18 | 21,600 | not given | Omega TG 863 (2002) |
| 1861 | 27.00 | 6.87 | 18 | 21,600 | 45 h | Omega SAV-INFO No. 29 |
| 1863 | 27.00 | 6.87 | 18 | 21,600 | 45 h | Omega TG 1863 (2002) |
Dimensions in mm, as printed in the source named on each row. Omega renumbered the 861 as the 1861 and the 863 as the 1863 after the 1995 finish upgrade.
- ST 145.0018 De Ville 1968
- ST 145.0022 Speedmaster Professional 1968
- ST 145.0014 Speedmaster Mark II 1969
- ST 145.0019 Seamaster 1969
- ST 145.0020 Seamaster 1969
- BA 145.0022 Speedmaster Moon Watch “De Luxe” 1969
- ST 145.0016 Seamaster 1969 - 1973
- ST 145.0024 Seamaster 1970
- ST 145.0023 Seamaster 1970 - 1975
- ST 145.0029 Seamaster 1971
- ST 145.0037 Speedmaster Mark II 1971
- MD 145.0034 Speedmaster Mark II 1972
- ST 145.0022-1 Speedmaster Apollo-Soyuz 1975
- BA 345.0802 Speedmaster 1980 (861 L)
- DD 145.0022-1 Speedmaster 1981
- DD 145.0022 Speedmaster German Edition 1981 - 1985
- ST 345.0803 Speedmaster German version 1982
- DL 345.0803 Speedmaster German version 1982 - 1985
- BJ 145.0041.009 De Luxe Chronograph 1983 (861 L)
- DD 145.0022-2 Speedmaster Special Italy 1987
- ST 345.0022.100 Speedmaster Moon Watch 1989
- ST 345.0022.101 Speedmaster 20th anniversary Apollo XI 1989
- 3590.50.00 Speedmaster Moon Watch 1989
- 4840 De Ville Prestige 1993
- ST 145.022.1051 Speedmaster Mir, 2nd series 1995
- 3570.50.00 Speedmaster Moon Watch 1996 (861 / 1861)
Twenty-six references list the 861 in the Omega Vintage Database, 1968 to 1996. Search them all.
The calibre number is marked on the plate. The movement is hand-wound — there is no rotor — with a 30-minute recorder, a 12-hour recorder and small seconds. Screws are plain, with no P suffix; the pusher stems and operating-lever extensions depend on the case, so check those against the case rather than the calibre.
Power reserve — why you see two numbers. Omega's 1970 guide gives the 861 a 50-hour reserve. The 2002 and 2004 guides give 45 hours for the same movement. Both are Omega's own figures, published thirty years apart; neither is a misprint. Quote the one that matches the guide you are working from.
861 or 1861? After the 1995 finish upgrade Omega renumbered the old 861 as the 1861. Plates, bridges and circuits are not interchangeable between them; the basic components are. If a seller lists an 1861 part for an 861, that distinction is the one to check.
Omega's regulating specification (SWTC table, 1997) for the 861: lift angle 50°, 21,600 A/h, rate 0 to +15 seconds a day in three positions, maximum variation 10°.
Sources: Omega technical guide G-19-C-030-FDE and the 861A parts list, Omega service bulletin CS08-19-C-006-E (2004), Omega regulating specifications (SWTC table, 1997), Omega Vintage Database. Part numbers are copied by hand: check every number against your part before you buy. Watch Breaker is independent and not affiliated with Omega SA. Omega is a trademark of Omega SA.
Read next
- Omega calibre 1861The 861 renumbered, and the beat-rate trap
- The Bench: take an 861 apartName every part in your browser
- Omega calibre 321The Speedmaster's first chronograph movement