Omega calibre 1040
Omega's automatic chronograph of 1971: a 31 mm movement with a 24-hour hand, an hour totaliser and a central minute-recording hand, with calendar and rapid date corrector.
eBay links are affiliate links: Watch Breaker may earn a small commission.
- 1040.1000PlateeBay
- 1040.1002Barrel and wheel train bridge (3/4 plate bridge)eBay
- 1040.1005Pallet cockeBay
- 1040.1026RotoreBay
- 1040.1030Balance cockeBay
- 1040.1037Chronograph bridgeeBay
- 1040.1070Mechanism bridgeeBay
- 1040.1100Ratchet wheeleBay
- 1040.1101Crown wheeleBay
- 1040.1105Click springeBay
- 1040.1106Winding stemeBay
- 1040.1107Clutch wheeleBay
- 1040.1108Winding pinioneBay
- 1040.1109Setting levereBay
- 1040.1110Setting lever springeBay
- 1040.1111YokeeBay
- 1040.1113Setting wheel (2 pieces)eBay
- 1040.1152Wig-wag setting wheeleBay
- 1040.1200Barrel with arboreBay
- 1040.1204Barrel arboreBay
- 1040.1208MainspringeBay
- 1040.1216Center wheeleBay
Omega lists 146 parts against the 1040 in GF 620-4. The numbers above are its own; look up any of them in the parts finder for the rest.
The 31 mm automatic chronograph calibres in our records:
| Calibre | Diameter | Height | Jewels | Beats/hour | Reserve | Source |
|---|---|---|---|---|---|---|
| 1040 | 31.00 | 8.00 | 22 | 28,800 | 45 h | GF 620-4 |
| 1041 | not given | not given | not given | 28,800 | not given | Omega Dressing Components 1993 |
| 1045 | 31.00 | 8.20 | 17 | 28,800 | 45 h | GF 620-6 |
Dimensions in mm, as printed in the source named on each row.
- ST 176.0002 Speedmaster Mark III 1971
- ST 176.0007 Seamaster 1971
- ST 176.0004 Seamaster 120, 1972
- ST 176.0005 Seamaster 1972 - 1976
- ST 176.0009 Speedmaster Mark IV 1973
- ST 176.0010 Seamaster Yachting 1973
Six references list the 1040 in the Omega Vintage Database, 1971 to 1976. Search them all.
Omega prints it as 31 CHRO C12 RA PC CAL CORR: a chronograph (CHRO), shock protected (PC), with calendar and rapid corrector (CAL CORR).
An automatic chronograph with a 24-hour indicator, an hour totaliser and a central minute-recording hand. The crown has three positions: winding, rapid date correction, hand setting.
28,800 beats an hour; lift angle 52°; Incabloc shock protection; 22 jewels. The balance and regulator parts carry over from the 860 family, and the click 320.1104 and chronograph driving wheel 320.1710 come from the 320.
Sources: Omega GF 620-4 (1040 folios 1-7, 1971), the 1972 Omega technical guide for the 1040, Omega regulating specifications, Omega Vintage Database. Part numbers are copied by hand: check every number against your part before you buy. Watch Breaker is independent and not affiliated with Omega SA. Omega is a trademark of Omega SA.
Read next
- The Bench: take a 1040 apartName every part in your browser
- Omega 861 parts listThe hand-wound Speedmaster chronograph
- Omega parts finderAny calibre, any part number