Omega calibre 601
17-jewel Omega calibre in Omega's 1964 parts catalogue. Used in Seamaster, Seamaster De Ville and De Ville references.
eBay links are affiliate links: Watch Breaker may earn a small commission.
- 601.1000PlateeBay
- 601.1001Barrel bridgeeBay
- 601.1003Train wheel bridgeeBay
- 600.1208MainspringeBay
- 550.1321Balance staff, pivotedeBay
- 550.1327Balance with hairspringeBay
- 550.1316Jewelled pallet fork and staffeBay
- 550.1305Escape wheel, pivotedeBay
- 470.1101Crown wheeleBay
- 600.1100Ratchet wheeleBay
- 600.1106Winding stemeBay
- 500.1109Setting levereBay
- 550.1224Centre wheel with cannon pinion (height 3.86)eBay
- 560.1224Centre wheel with cannon pinion H2 (height 4.36)eBay
- 600.1240Third wheeleBay
- 550.1243Fourth wheeleBay
printed on Omega's 601 sheet; the rest carry over from base calibre 600.
Calibres built on the same base, 600:
| Calibre | Jewels |
|---|---|
| 600 | 17 |
| 602 | 17 |
| 610 | 17 |
The 601 is the base calibre for the 611.
Look up any of them in the parts finder to compare part numbers.
- ST 131.0018 Seamaster 1962
- ST 135.0010 Seamaster De Ville 1962
- ST 135.0011 Seamaster 1962
- ST 135.0016 Seamaster 1966
- ST 135.0017 Seamaster 1966
- ST 135.0018 De Ville 1966 - 1972
- ST 135.0020 Seamaster De Ville 1963 - 1973
- ST 135.0027 Seamaster 1967
- ST 135.0033 Genève 1968
- ST 135.0070 Genève 1969
- BA 131.0021 Genève 1966
- BA 131.0041 Genève 1970
- JD 135.0011 Seamaster 1962
- MD 135.0041 Genève 1968
- 135.0028 De Ville 1967
- P 6587 US Collection 1961
26 references list the 601 in the Omega Vintage Database. Search them all.
Omega prints it as 27.90 SC TI PC AM 17 pierres: sweep second (SC), shock protected (PC), non-magnetic (AM).
Omega's sheet says the calibre number is marked on the bridge.
19,800 beats an hour; lift angle 49°.
Download the 601 parts sheet (PDF, 89 part numbers from Omega's catalogue, laid out for the bench)
Sources: Omega GF 620-3/5, Omega regulating specifications, Omega Vintage Database. Part numbers are copied by hand: check every number against your part before you buy. Watch Breaker is independent and not affiliated with Omega SA. Omega is a trademark of Omega SA.
Part pages for the 601
27 parts with a page of its own: the number, the name and every calibre Omega lists it for.
- 330.1111 YokeWhich calibres it fits
- 330.1318 Collet for hairspringWhich calibres it fits
- 330.1341 In-settings, upper and lowerWhich calibres it fits
- 330.1344 End-piece holder, upper and lowerWhich calibres it fits
- 360.1112 Yoke springWhich calibres it fits
- 360.1317 Stud for hairspringWhich calibres it fits
- 470.1101 Crown wheelWhich calibres it fits
- 470.1108 Winding pinionWhich calibres it fits
- 470.1132 Pressure spring for setting leverWhich calibres it fits
- 500.1324 RollerWhich calibres it fits
- 550.1103 Crown wheel seatWhich calibres it fits
- 550.1107 Clutch wheelWhich calibres it fits
- 550.1110 Setting lever springWhich calibres it fits
- 550.1150 Crown stem with steel crownWhich calibres it fits
- 550.1150a Crown stem with crown gold plated (pink)Which calibres it fits
- 550.1150b Crown stem with crown gold plated (yellow)Which calibres it fits
- 550.1243 Fourth wheelWhich calibres it fits
- 550.1246 Minute wheelWhich calibres it fits
- 550.1305 Escape wheel pivotedWhich calibres it fits
- 550.1312 Pallet staffWhich calibres it fits
- 550.1321 Balance staff, pivotedWhich calibres it fits
- 550.1327 Balance with hairspring, regulatedWhich calibres it fits
- 550.1363 Stud-holderWhich calibres it fits
- 560.1218 Cannon pinion H2, height 2.55Which calibres it fits
- 560.1224 Center wheel with cannon pinion H2, height 4.36Which calibres it fits
- 560.1231 Hour wheel H2, height 1.68Which calibres it fits
- 710.1339 Adjuster for regulatorWhich calibres it fits