Omega calibre 751
24-jewel day-date automatic in Omega's 1967 parts catalogue. Used in Constellation and Seamaster references.
eBay links are affiliate links: Watch Breaker may earn a small commission.
printed on Omega's 751 sheet; the rest carry over from base calibre 563.
| Calibre | Jewels | Train bridge | Upper auto bridge |
|---|---|---|---|
| 750 | 17 | — | — |
| 751 | 24 | 751.1003 | 551.1031 |
| 752 | 24 | 752.1003 | 552.1031 |
The 751 and 752 add seven jewels in the automatic winding train (4249, 4250, 4251, 4253) where the 750 has bushings.
- BA 168.0016 Constellation 1966
- 168.0019 Constellation 1966
- BA 168.0023 Seamaster 1968
- 168.0029 Constellation 1967
- ST 168.0034 Seamaster 1970
- ST 168.0041 Constellation 1970-75
- ST 368.0845 Constellation 1969
From the Omega Vintage Database.
Omega prints it as 27.90 RA SC PC CALD CORR AM 24 jewels: sweep second (SC), shock protected (PC), non-magnetic (AM), day and date. The number is stamped on the train wheel bridge.
Regulating: 49° lift angle, 0 to +20 seconds a day in three positions.
Calendar screws (technical guide No. 39, 1968): four 3441 hold the day star jumper, date corrector, date jumper and its spring; two 2050 hold the calendar plate.
Sources: Omega GF 620-5 (751 folios 1-2, 1967), GF 620-3, Technical Guide No. 39 (1968), Omega regulating specifications, Omega Vintage Database. Part numbers are copied by hand: check every number against your part before you buy. Watch Breaker is independent and not affiliated with Omega SA. Omega is a trademark of Omega SA.
Part pages for the 751
42 parts with a page of its own: the number, the name and every calibre Omega lists it for.
- 330.1318 Collet for hairspringWhich calibres it fits
- 330.1341 In-settings, upper and lowerWhich calibres it fits
- 330.1344 End-piece holder, upper and lowerWhich calibres it fits
- 360.1317 Stud for hairspringWhich calibres it fits
- 450.1105 Click springWhich calibres it fits
- 470.1101 Crown wheelWhich calibres it fits
- 470.1102 Crown wheel coreWhich calibres it fits
- 470.1132 Pressure spring for setting leverWhich calibres it fits
- 470.1332 Regulator pointerWhich calibres it fits
- 500.1324 RollerWhich calibres it fits
- 550.1001 Barrel bridgeWhich calibres it fits
- 550.1005 Pallet cockWhich calibres it fits
- 550.1100 Ratchet wheelWhich calibres it fits
- 550.1103 Crown wheel seatWhich calibres it fits
- 550.1104 ClickWhich calibres it fits
- 550.1107 Clutch wheelWhich calibres it fits
- 550.1113 Setting wheelWhich calibres it fits
- 550.1200 Barrel with arborWhich calibres it fits
- 550.1204 Barrel arborWhich calibres it fits
- 550.1208 MainspringWhich calibres it fits
- 550.1240 Third wheelWhich calibres it fits
- 550.1243 Fourth wheelWhich calibres it fits
- 550.1246 Minute wheelWhich calibres it fits
- 550.1255 Friction spring for sweep second pinionWhich calibres it fits
- 550.1305 Escape wheel pivotedWhich calibres it fits
- 550.1312 Pallet staffWhich calibres it fits
- 550.1321 Balance staff, pivotedWhich calibres it fits
- 550.1327 Balance with hairspring, regulatedWhich calibres it fits
- 550.1331 Regulator (regulator ring)Which calibres it fits
- 550.1333 Two-piece regulatorWhich calibres it fits
- 550.1363 Stud-holderWhich calibres it fits
- 550.1400 Rotor axleWhich calibres it fits
- 550.1437 Driving gear for ratchet wheelWhich calibres it fits
- 550.1438 Bearing for driving gear for ratchet wheelWhich calibres it fits
- 550.1441 Satellite pinion of ratchet wheelWhich calibres it fits
- 550.1451 Gib of rotorWhich calibres it fits
- 550.1453 Large wheel of winding wheelWhich calibres it fits
- 550.1454 Small wheel of winding wheelWhich calibres it fits
- 550.1464 Winding gearWhich calibres it fits
- 550.1465 Automatic ratchet wheel mountedWhich calibres it fits
- 560.1529 Date jumper springWhich calibres it fits
- 560.1559 Double calendar setting wheelWhich calibres it fits